Doepfer A-138D Crossfader FX Insert EURORACK – NEW – PERFECT CIRCUIT
Specifications
| Return Shipping Will Be Paid By | Buyer |
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 30 Days |
| Brand | Doepfer |
| MPN | A-138d |
| Type | Modular Synthesizer |
DESCRIPTION Module A-138d can be used in two different ways; as a crossfader module within the A-100, or as an insert module for external effect units (e.g. guitar stomp boxes) with dry/wet control. If the module is used as a crossfader within the A-100 the two audio signals are connected to the sockets In 1 and In 2. The position of the CF (Crossfade) control defines the relation between the levels of the signals In 1 and In 2 that appear at the Mix Output. In the leftmost position of CF only In 1 appears at the output, in the rightmost position only In 2. In the center position both inputs appear with the same level at the Mix Output. Each input is equipped with two sockets (miniature multiples) so that the input signals can be forwarded to other modules too. Even the Mix Output has two sockets available. The mute switch can be used to mute In 1 or In 2 independent of the position of the crossfade control. In the center position it has no function. The controls Atten. and Amp. and the 1/4' sockets FX Send and FX Return are not used in this application. If the module is used as an effect send/return module with dry/wet control the A-100 signal that has to be processed by the external effect unit is connected to In 1. The signal can be attenuated by control Atten. before it is output to the 1/4' socket FX Send. The attenuator has been added because some effect units without input level control (especially guitar stomp boxes) will distort with A-100 levels (~ 1 Vss or more). The attenuator can be used to reduce the signal level so that no distortion occurs. Atten. is adjusted so that the external effect unit does not distort. The output of the external effect unit is connected to the 1/4' socket FX Return. This socket is followed by an amplifier and the control Amp. is used to amplify the signal to obtain again A-100 audio level (~ 1Vss or more). Amp is adjusted so that the loudness of both signals (i.e. original = dry = In 1 and the effect return signal = wet = In 2) have nearly the same loudness. The output of the amplifier is normalled to the upper socket of Input 2. In this application no plug is inserted into the upper In 2 socket. The lower In 2 socket can be used to obtain the effect return signal before it is processed by the crossfade unit of the A-138d. The CF control of the A-138d works now as a dry/wet control for the external effect. In the leftmost position of CF only the original signal (i.e. not processed) appears at the Mix Output, in the rightmost position only the effect signal. In the center position the original and the processed signal appear with the same level at the Mix Output. The mute switch can be used to mute the original or the effect signal independent of the position of the crossfade control. In the center position it has no function. FeaturesCrossfader for two different A-100 signalsCrossfade between original and processed audio signal (dry/wet control). For this the incoming audio signal is patched to input 1 of the A-138d and passed on to the audio input of the sound processing module in question (e.g. filter, phaser, flanger, frequency shifter, wave multiplier, wave shaper ...). The audio output of the sound processing module is patched to input 2 of the A-138d.Integrates external effect units into A-100 with dry/wet control for the external effectGUARANTEE New Gear We are authorized dealers for a number of great companies that back their products with standard warranties. We extend this warranty period for 1 year beyond the manufacturer's as a token of our gratitude for shopping with us :) We want to make sure that you don't get stuck with a lemon and will either replace or have the unit repaired by an authorized service center on our dime. We offer a 30 day return policy 'no questions asked'. Unless the item is defective, you will be subject to a 15% restocking fee. Used Gear All gear is tested prior to listing for sale. Any known issues will be mentioned in the item description. We work extremely hard to make sure that you have peace of mind when buying pre-owned gear. You will have 14 days from receipt of the item to test and make sure that everything meets your expectations. If the item is found to be defective, we will cover return shipping. You must contact us first to set up the RMA. Any used items returned for reasons other than functionality (within this 14 days) will be subject to a 20% restocking fee. We will bend over backwards to make sure that you are happy with your purchase. If you have any issues or questions at all please email or call us. We are happy to assist!SHIPPING Orders will be processed and handled within 1 business day in most cases. Orders placed before 1pm PST during our business hours generally are shipped the same day. We also offer expedited shipping. If you have any special requests please contact us first, and we will do our best to accommodate you. Domestic Buyers We offer Free shipping on every item big or small to the lower 48 US StatesHawaii, Alaska & Puerto Rico residents are subject to a handling fee, so please contact for quotes.We ship to APO & FPO addresses, but please contact for a quote. We insure every package for the full amount Any purchase over $200 will require a signature. THERE ARE NO EXCEPTIONS! International Buyers We ship via FedEx or USPS to most countries around the worldBuyer is 100% responsible for ALL Duties & Taxes (VAT,etc.) imposed by your local government/ customs officials. These are not included in our Shipping & Handling fees so please be aware before purchasing.International orders are usually delivered in 3-5 business days if there are no delays caused by customs or weather conditions. POLICIES Return Policy You must contact us for a RMA (Return Merchandise Authorization) within 30 days for new gear and 14 days for used gear.Items are subject to either a 15% (new gear) or 20% (used gear) restocking fee, unless found to be defective. Customer is required to cover shipping using a trackable service with signature confirmation.We will cover return shipping for defective items and submit a return label via email.All new items must return in 'new' condition with all original packaging, warranty cards, and cables. All used items must be returned in the same condition as picture & represented online.If new items arrive damaged and/or without original materials the RMA may be revoked or you may be subject to a 25% restocking fee. If used items arrive damaged the RMA may be revoked or you may be subject to a 30% restocking fee. Please allow up to 5 business days for us to process returns. Refunds, store credit or replacements will be handled within that time frame If you experience a problem with a unit: do not attempt to open or repair the unit yourself. Any attempt to do so will void any warranty or guarantee. Please send us a detailed description of the problem you are experiencing and we will have a team member contact you as soon as possible.International Buyers We are not responsible for unit damaged due to use of improper voltage. Please make sure to double check voltage compatibility and use a proper voltage converter when necessary.CONTACT US Our customer service hours are Monday through Friday, 10AM to 7PM Pacific Time. Feel free to contact us We are here to help, so if you don't get ahold of us leave a message and we'll be back with you as soon as possible. Thanks! © 2018 Perfect Circuit. All Rights Reserved.